Work completed.

10/2/2016

10 Comments

The repeater is now fully operational.Thanks for your patience over the last few hours.

10 Comments

GW3WSU

10/2/2016 10:50:21 am

It seems to be Fusion only at the moment (1845)

mark

10/2/2016 11:01:29 am

It is capable of FM and fusion,it all depends on which mode is being used at the time.If you are using an FM only radio change your ctcss setting to encode and decode.You will not hear the digital signal then.

Colin GW3WSU

10/2/2016 11:11:40 am

I am aware of the CTCSS thing Mark. I just wondered why I've not heard any analogue ops through in the last half hour. Does it beacon now?

Colin GW3WSU

10/2/2016 11:15:14 am

I've just tried an Analogue access without success!!

mark

10/2/2016 11:34:09 am

looking into

Colin GW3WSU

10/2/2016 11:39:53 am

Thanks Mark. I guess there must be a few "teething" troubles!!

Colin GW3WSU

10/3/2016 01:25:18 am

As an analogue user has to keep the DECODE ON to avoid the Digital noise we can't hear the repeater call sign & I suspect the cw Beacon either. Can't the Beacon be made to radiate despite the DECODE being on?

Mark M0SKV

10/3/2016 09:07:06 am

CTCSS encode is now ON for all ID'S.

GW3WSU

10/3/2016 09:49:07 am

Thanks Mark. Sorry to be a "pain"!!

Mark

10/3/2016 01:00:49 pm

No problem Colin. We have made a few changes today. It's a bit of a steep leaning curve. But hopefully the main problems are sorted out now.

Work completed.

Leave a Reply.

Author

Archives

Categories